Ultrasonic Vortex Flowmeter PEEK Resin Series

Ultrasonic Vortex Flowmeter PEEK Resin Series

Features

Excellent corrosion resistant feature Because excellent corrosion resistant PEEK resin is used for the parts in contact with liquid, it is most suitable for the measurements of corrosive fluid and clean fluid etc. In addition, because bulking agent is not used for PEEK resin, the metallic ion does not dissolve and all nonconductive fluids including ultra pure water can be measured.

Vibration noise resistant structure

Because high frequency ultrasonic sensor is used, PEEK series is not influenced by mechanical noise such as piping vibrations.

Complete pocketless structure

Because the pocketless structure where fluid is always moving is adopted, it is suitable for the measurement of the liquid that changes quality easily.
Weight saving It can be directly installed at the resin piping of the ultra pure water line etc. by weight saving with resin made.

 

Main specification

Applicable fluid Liguid (Corrosive fluid and ultra pure water are also acceptacle)
Accuracy ±3% RD (±1% RD: Option)
Flow rate range 1.7 ~ 220 L/min (Different depending on the connection size and viscosity)
Fluid temperature 0 ~ 140℃ 
Max. Working pressure 0.39 ~ 0.98 Mpa
Connection size 15 mm (1/2B), 20 mm (1B)
Connection method Screwed, Flange (Wafer)
Material Housing PEEK (Polyether ether ketone) resin
  Indicator case PP, PVDF, resin
  Screw Fluoric rubber
Piping installation Horizontal, Vertical, Diagonal