IsoTrans A 20400

IsoTrans A 20400

Detail The first decoupled passive isolator with load stop function to provide protective separation of 0(4) … 20 mA standard signals.
  Thanks to an extremely high packing density of up to 320 channels per meter of mounting rail and outstanding technical properties such as protective separation, these isolators leave the competition in the dust – even when it comes to the price-performance ratio!
  The IsoTrans A 20400 draws its power as a voltage drop directly from the measurement signal without falsifying it. There are no costs for a power supply and wiring. The IsoTrans A 20400 has virtually no self-heating that would cause the electronic components to age faster. Together with a patented circuit design, this means maximum reliability. The consequence of this extraordinary long service life: 5-year warranty!
Facts Extremely compact design
up to 320 channels per meter
  1- and 2-channel versions
cheap and flexible for a wide range of applications
  Galvanic isolation
between the input and outpu protection against incorrect measurements  or damage to the equipment due to parasitic voltages
  Protective separation up to 300 V AC/DC according to EN 61140
to protect personnel and equipment
  Load stop function prevents feedback
e.g. in the case of an open output circuit
  No power supply required,
cost saving due to lower wiring effort no mains interference, no unnecessary self-heating and therefore maximum component service life
  High accuracy
no distortion of the measurement signal
  Maximum reliability
no repair and failure costs
  International use
UL / CSA approvals
  5-year warranty
The Task Measurement signals between sensor and controller should be galvanically isolated to ensure reliable and safe operation of the installation. Here, loop-powered signal isolators are a low-cost solution. There is no expenditure for power supply units and the associated wiring.
The Problems are often, particularly in large plants, the lack of space for mounting the isolators and the higher operating temperatures in distributors and enclosures.
The Solution from Knick are the advanced series loop-powered isolators IsoTrans
A 20400. Thanks to an extremely high packing density of up to 320 channels per meter of mounting rail and outstanding technical properties such as protective separation, these isolators leave the competition in the dust —even when it comes to the price- performance ratio!
The Housing The ultra-slim 6 mm wide modular housing for one or two channels allows for simple and fast installation.