SensoTrans DMS P 32200

รายละเอียด The universal SensoTrans DMS P 32200 strain gauge transmitters provide connection possibilities for all standard strain gauge force transducers and strain gauge load cells in full bridge configuration.
They can be flexibly adapted to the respective measuring task using DIP and rotary encoder switches or via an IrDA® port.
Facts Universal usability for strain gauges, pressure and load cells, and other resistive measuring bridges
Convenient setting of all parameters via IrDA interface
Uncomplicated, menu-guided adjustment also “on site“ including archiving of the configuration data
Intuitive configuration of the basic parameters
Easy, without tools, using 4 rotary and 8 DIP switches
Calibrated range selection
No complicated trimming
Convenient adjustment
Zero point and sensitivity adjustable via IrDA® port
Simulation of any desired output values for correct installation/commissioning
Protective separation according to EN 61140
Protection of the maintenance staff and subsequent devices against excessively high voltages up to 300 V AC/DC
Functional safety up to SIL 2 (up to SIL 3 in case of redundant configuration) with TÜV certificate
Systematically developed according to EN 61508
High accuracy due to innovative circuit design
Minimum space consumption in the enclosure
Modular housing: just 6 mm wide
More transmitters per meter of DIN rail
Low-cost assembly
Quick mounting, convenient connection of power supply through DIN rail bus connectors
(in case of 24 V DC power supply)
5-year warranty
รายละเอียด 3-port isolation with protective separation up to 300 V AC/DC according to EN 61140 ensures optimal protection of personnel and equipment as well as unaltered transmission of the measurement signals. The SensoTrans DMS P 32200 offer maximum performance in the smallest of spaces.
Adjusting the zero point and sensitivity to the individual strain gauge sensor is particularly convenient via the infrared port, for example using a PDA. Sensors with known characteristics can be very easily calibrated using 4 rotary encoder switches and 8 DIP switches. Special measuring tasks can be solved with SensoTrans devices that Knick configures according to individual specifications. Fixed-range devices without switches are used, for example, when manipulations or mix-ups must be precluded.
Knick offers the SensoTrans DMS P 32200 transmitter with SIL approval for applications with high demands on functional safety. The requirements of EN 61508 were implemented through specially developed hardware and software. The implemented fail-safe concept makes use of structural measures at the device level (redundancy of system components) and diagnostic methods for selective fault detection. The product is SIL 2 approved (EN 61508) by an authorized body (TÜV Rheinland). SIL 3 in redundant implementations.