EE1900 Humidity Measurement Module for OEM Applications
  The EE1900 module is designed for highly accurate measurement of relative humidity (RH) or dew point temperature (Td) in climate chambers and other demanding applications. The humidity sensor is particularly resistant to dust and corrosive agents and it performs even in chemically contaminated environment.
Type EE1900 relative humidity measurement module – compact size, plastic probe
Detail The EE1900 module consists of an electronics board and a sensing probe. It employs an innovative combined humidity and temperature sensing element, which is well protected from pollution and corrosion by the proprietary E+E coating. This leads to high accuracy and excellent long-term stability even under harsh environmental conditions.
  Thanks to the Automatic Sensor ReCovery (ARC) function, the sensor also copes well with chemical contamination. By controlled heating, the chemicals gaze out from the sensing element.The ARC mode can be triggered either via a push button on the board or an electrical signal.
  The humidity module features an analogue output, which can be set to current or voltage. The service interface allows for output scaling and adjustment of the humidity measurement. The product configuration software EE-PCS is available free of charge.
  The high quality, flexible probe cable up to 3m length facilitates the probe installation. With two sizes of the electronics board the module can be easily integrated into existing climate chambers.
Key Features EE1900 Outstanding long term stability due to Automatic Sensor Recovery
  High resistance to dust and corrosion thanks to E+E proprietary sensor coating
  Wide temperature working range -70 °C…180 °C
  Service interface for configuration and adjustment
  Voltage or current output, selectable
Technical data EE1900  
ACCURACY RELATIVE HUMIDITY (-20…40 °C / -4…104 °F) ± 2% RH (≤90% RH)
  ± 2.5% RH (>90% RH)
ACCURACY RELATIVE HUMIDITY (-40…180 °C / 104…356 °F) ± 2.5% RH (≤90% RH)
  ± 3.5% RH (>90% RH)
ACCURACY DEW POINT, TAMBIENT-TD <20 °C (36 °F) ± 2 °C (± 3.6 °F)
OUTPUTS 0-1/5/10 V or 0/4-20mA (3-wire)
SUPPLY 10-35V DC and 10-28V AC