Ultrasonic Vortex Flowmeter PPS Resin Series


Excellent corrosion resistant feature Because an excellent corrosion resistant liner PPS resin that does not contain glass is used for the parts in contact with liquid, it is suitable for the measurements of pure water and chemicals that are sensitive to dirt.
Complete pocketless structure Because sensor is externally installed, the pocketless structure where fluid is always moving is adopted.
Noise resistant structure Because high frequency ultrasonic sensor is used, it is hard to be influenced by mechanical noise such as piping vibrations.
Weight saving It can be directly installed at the resin piping of the pure water line etc. by weight saving with resin made.
Chemical fluid resistant structure Because the amplifier case storing the electric circuit is also molded as one body with a resin, the PPS series is excellent in corrosion resistance when chemicals are measured.


Main specification

Applicable fluid Liguid (Water, pure water, chemical solutions not corrosive to PPS resin)
Accuracy ±3% FS
Flow rate range 0.3 ~ 40 L/min (Connection size: 15 mm)
5 ~ 120 L/min (Connection size: 20 mm)
Fluid temperature 0 ~ 50℃ 
Max. Working pressure 1.0 Mpa
Connection size 15 mm, 20 mm
Connection method Union joint (TS-type)
Material Housing Linear PPS (Polyphenylene sulfide) resin
  Indicator case PVC
  Screw FKM (EPDM)
Piping installation Horizontal, Vertical, Diagonal