EE650

EE650

EE650 Air Flow Sensor for HVAC
  The EE650 air flow sensor is dedicated for accurate and reliable measurement in building automation and ventilation applications.
Type EE650 air flow sensor with remote probe
  EE650 air flow sensor for duct mounting
Detail EE650 employs the new VTQ air flow sensor element, which operates on the thermal anemometer principle and is manufactured by E+E in state-of-the-art thin film technology.
  Due to its innovative design, the VTQ air flow sensor element is very robust and highly insensitive to pollution, which leads to outstanding long-term performance.
  The measured data is available either on an analogue voltage or current output, user selectable, or on the RS485 interface with Modbus RTU or BACnet MS/TP protocol.
  The enclosure design and the mounting flange included in the scope of supply allow for easy installation or replacement. The configuration and adjustment of the EE650 can be comfortably performed on the electronics board or via digital interface.
Typical Applications HVAC
  Ventilation systems
  Process control
Key Features EE650 Best accuracy and long term stability
  High resistance to pollution and mechanical stress
  Measuring range 0.2 – 10/15/20 m/s (40 – 2000/3000/4000 ft/min), user selectable
  Current and voltage outputs, selectable 
  RS485 interface with Modbus RTU or BACnet MS/TP
  Duct mount and remote probe versions
  Easy installation
  Digital interface for adjustment by user
Technical data EE650  
MEASURING RANGE – USER SELECTABLE 0…10 m/s (0…2000 ft/min)
  0…15 m/s (0…3000 ft/min)
  0…20 m/s (0…4000 ft/min)
ACCURACY AT 20 °C (68 °F), 45 % RH, 1013 HECTOPASCAL 0.2…10 m/s ±(0.2 m/s + 3 % of mv)
  0.2…15 m/s ±(0.2 m/s + 3 % of mv)
  0.2…20 m/s ±(0.2 m/s + 3 % of mv)
RESPONSE TIME – USER SELECTABLE typ. 4 sec or typ. 1 sec.
OUTPUT ANALOGUE 0-10 V and 4-20 mA
OUTPUT DIGITAL Modbus RTU or BACnet MS/TP
SUPPLY 24 V AC/DC