EE260

EE260

EE260 Heated Humidity and Temperature Probe for Meteorology
  The EE260 humidity and temperature probe with heated humidity sensing element and probe heating delivers precise and reliable measuring results even at high humidity conditions.
Type

EE260 humidity and temperature probe

 

EE260 humidity and temperature probe with radiation shield

 

Humidity and temperature sensing element

Detail  
Measuring Performance The EE260 humidity and temperature probe has a dual heating system (sensing element and probe heating). This prevents condensation on the RH sensing element, the sensing head and the filter cap. The probe therefore provides precise and reliable measurement results even in the case of permanent high humidity.
  Another benefit of the dual heating system is the very short response time and a fast recovery after condensation.
  The E+E sensor coating improves the long-term stability and service life in dusty and corrosive environments.
Compact and Robust The innovative enclosure of the EE260 combines a heated humidity sensing head and an additional temperature sensing element in a single probe.
  Due to its compact design, the probe is compatible with commercially available rotationally symmetric sensor radiation shields.
  The robust IP67 enclosure made of UV- and heat-resistant elastomer protects the internal electronics from environmental influences and mechanical damage.
Analogue and Digital The EE260 probe provides the measured data simultaneously on two freely configurable voltage outputs and via the RS485 interface (Modbus RTU).
  Based on the measured humidity and temperature values, the EE260 calculates further humidity-related quantities such as the dew point temperature, absolute humidity or mixing ratio.
Typical Applications Meteorological weather stations
  Weather warning systems (road traffic, airports)
  Detection of icing hazard
Protective Sensor Coating The E+E proprietary sensor coating is a hygroscopic layer applied to the sensing elements, their leads and soldering points. The coating substantially extends sensor life-time and ensures optimal measurement performance in corrosive environments (salts, off-shore applications). Additionally, it improves the long term stability of E+E sensors in dusty, dirty or oily applications by preventing stray impedance caused by deposits on the active sensor surface or on the electrical connections.
Key Features EE260 Excellent measurement performance and high accuracy in the high humidity range
  Compact, robust IP67 enclosure
  Heated RH sensing element and heated sensing head
  Two freely configurable voltage outputs
  Integrated T sensing element
  RS485 interface with Modbus RTU protocol
  Short response time and a fast recovery after condensation
  Calculation of all relevant humidity related quantities
  E+E sensor coating against pollution and corrosion for best long term stability
  Compatible with rotationally symmetric sensor radiation shields
Technical data EE260  
MEASURING RANGE – HUMIDITY

0…100% RH

ACCURACY – HUMIDITY

±1.3% RH

MEASURING RANGE – TEMPERATURE

-60…60 °C (-76…140 °F)

ACCURACY – TEMPERATURE

analogue: 0.15 °C (0.27°F)

  digital: 0.1 °C (0.18°F)
DIGITAL INTERFACE RS485 with Modbus RTU
ANALOGUE OUTPUTS

0-1/2.5/5/10V

SUPPLY 7 – 30 V DC